Fujipoly America Corporation Fujipoly   Welcome to Fujipoly.  A worldwide network to serve your electronic packaging needs.  Creating unprecedented products with unprecedented performance -- Fujipoly's network of dependability.


  
Request quotes, order products, request product samples and submit change order requests.Review design guidelines for each product line.View Fujipoly's company history, press releases, trade shows and international locations.SitemapJapan
   
View Fujipoly's complete line of electronic packaging components.
Access Technical Documents, FAQ's and submit questions to Fujipoly engineers.
LED Light for You - Osram Certified Partner 		 
ZEBRA Elastomeric Connectors
SARCON Thermal Interface Materials
Fusible Tapes
LCD Bezels and Connectors
Custom Silicone Rubber Extrusions
LCD Bezel and Connectors
spacer
LCD Bezels and Masks
ZEBRA Connector Retainers
 
 
   
Fujipoly LCD connector assemblies with clear bezels provide an attractive and reliable way of mounting LCD's onto a PC board.  Electrical connection between LCD and PC board contact surfaces is made by two Series 2004 ZEBRA connectors, which consist of alternating parallel layers of conductive and non-conductive silicone rubber repeating on a 0.18mm (.007") pitch.

Because the LCD is mounted on rubber components, the assembly provides shock and vibration protection for the display.  The clear bezel introduces an extra measure of protection for the LCD.

 LCD Connector Product Shot

 

APPLICATIONS:
  • Flat Mount Dual Inline LCD's
  • Clocks, Meters, Calculators, Appliances, Automotive Dashboards, Gas Pumps, Industrial Displays, Instrumentation, Computing Devices.

Flat Mount LCD connectors are designed to mount Dual Inline LCD's flat onto printed circuit boards without pins or soldering.  The connectors consist of two ZEBRA connectors inserted into a specially designed plastic holder.  See pages 2 through 11 for specific connector selection information.  The retainer positions the LCD and aligns it with the printed circuit board contacts via two locating studs.  A gas tight environmental seal is created when the ZEBRA connectors are deflected between the LCD and the printed circuit board when the bezel is tightened into position.

LCD Connections
 

 COMPATIBILITY:

The operating temperature range for the connector assembly exceeds that for the LCD.  The ZEBRA connectors provide a gas-tight seal of the contact surfaces to assure reliable operation in hostile environments.  The bezel protects the LCD polarizer from scratches and may be used directly in the window provided in the instrument enclosure.

operating temperature 
          -40°C to 95°C (-40°F to +203°F)
storage temperature
          -56°C to 95°C (-65°F to +203°F)
nominal resistance
          1000 ohms
humidity range
          0 to 100% R.H.

The connector assembly consists of a retainer, two ZEBRA connectors, viewing area mask and, if required, a bezel.  Assembly is simple: place the retainer on the PC board using the locating studs for alignment, insert the ZEBRA connectors, LCD, and mask and secure the bezel with two screws.  The LCD connectors are available in one basic configuration for Dual Inline Displays where the viewing area is in the center.

 

A complete range of sizes accommodate LCD's up to 1.50" x 2.75" (38.10 x 69.85 mm).  For dimension details, find assembly part number below and match with bezel and retainer component information.
 

 Assembly #
09-10050		Assembly #
09-19137		Assembly #
09-10103		Assembly #
09-19102		Assembly #
09-19143		Assembly #
09-10067
For LCD Size13.72 x 23.88 mm
.54 x .94 in.		30.50 x 50.80 mm
1.20 x 2.00 in.		30.50 x 50.80 mm
1.20 x 2.00 in.		30.50 x 50.80 mm
1.20 x 2.00 in.		30.50 x 69.85 mm
1.20 x 2.75 in.		38.10 x 69.85 mm
1.5 x 2.75 in.
Bezel Masknoneblackblacknoneblackblack
Bezel Colorclearclearclearblackclearclear

 

  		 
   
Copyright 2003-2010, Fujipoly America Corporation. All rights reserved.